Detail PCA 320 Free & Total Chlorine, PH & Temperature Analyzer
-Range Free & Total Cl2 0.00 to 5.00 mg/ L ( ppm)
-pH 0.00 to 14.00 pH
-Temperature 5.0 to 75.0 ° C ( 41 to 167 ° F)
-Resolution Free & Total Cl2 0.01 mg/ L ( ppm)
-pH 0.01 pH
-Temperature 0.1 ° C
-Accuracy Free & Total Cl2 ± 8% or ± 0.05 mg/ L whichever is greater
-pH ± 0.05 pH
-Temperature ± 0.5° C
-Min. Detectable
-Level Free & Total Cl2 0.05 mg/ L ( ppm)
-Input Impedance 1012 Ohm
-Calibration Free & Total Cl2 one point
-pH one or two point or in line calibration
-Sampling Rate Free & Total Cl2 adjustable from 3 to 90 minutes
-pH adjustable from 3 to 120 seconds
-Dosage Free & Total Cl2 proportional
-pH ON/ OFF or proportional, relay or 4-20mA output
-Delta Free & Total Cl2 selectable from 0.1 to 5 mg/ L ( ppm)
-pH selectable from 0.1 to 2 pH ( hysteresis adjustable from 0.05 to 2 pH)
-Recorder Output 4-20mA, 0-20mA
-PC Connectivity RS485 port, galvanically isolated
-Baud Rate 1200, 2400, 4800, 9600 bps
-Data Logging up to 3500 data points
-Alarm Relay SPDT contact with 5A, 230V resistive load
-Dosing Relay SPDT contact with 5A, 230V resistive load
-System Error SPDT contact with 5A, 230V resistive load
-Inlet Pressure 0.07 to 4 bar with no external pressure regulator ( for pressure exceeding four bar an external pressure regulator is required)
-Sample Flow 100 to 300 mL/ min
-Sample Temperature 5 to 40° C ( 41 to 104° F)
-Sample Inlet/ Outlet Connection 12mm ( 1/ 2" ) male NPT fitting
-Drain Connection 10mm ( 3/ 8" ) barb
-Power Supply 115 VAC ± 10% or 230 VAC ± 10% ; 50/ 60 Hz; 20 VA
-Enclosure NEMA-4X standard, molded fiberglass polyester with transparent Lexan window
-Dimensions/ Weight 318 x 267 x 159 mm ( 12.5 x 10.5 x 6.25’ ’ ) / 5 kg ( 11 lb.) without reagents
Tampilkan Lebih Banyak